...switch is broken and stuck in the "on" position. Until you fix it all you can do is plug it in and out for operation. If you are handy you can take the switch out, make the repair of the broken part, ...
switch is broken. I have found on some of the vacuums I've worked on the on/off switch is not broke. There is a little button about the size of a candy cig and 1/4 " tall and there is usually a rubber
...broken as the switch does not ''hold'' when the toggle is activated. It seems to return to it's ''off'' setting as soon as the toggle is released. What ''holds'' the switch in its ''on'' position? ...
...switch on my unit is broken and needs replaced. Then, where do I get the part that is broken? Maybe this picture will help, most vacuum repair shops should be able to get the part you need. You can ...
...switch broken on Kirby Classic III where I can buy it in Toronto, Canada area Generic problem for all Vacuums Front switch broken on Kirby Front switch broken on Kirby Classic III where I can buy it ...
...broken parts. If it's an electrical switch/button or lever, you need to check and make sure it's clean, and all the contacts to wires are NOT broken or damaged. You may have to replace parts if they ...
switch and outside button is a plastic rocker, which is broken. you will find two broken pieces, one spring for the rocker piece, and one small plastic rod, which goes inside of the spring for support
Question about Vacuums
...switch? Brush will not turn but belt is not broken. I believe setting was hard floors and son forced the switch when the vaccuum was running. The lever that switches from carpet to hard floors may be ...
Question about Riccar Vacuums
switch to my Riccar 1500p hose is broken for the 2nd time. I don't want to replace the entire hose again, where can i get the switch and leads? The switch to my Riccar 1500p hose is broken for the
331 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
