...2X will not spray water. we have even tried the tool attachment and still nothing sounds like you may have lost the pump prime turn the unit off and hold the trigger down the one on the handle for a ...
...of pump failure problems. most likely the pump has gone bad. check the pump motor with a continuity tester if the pump motor is good disconnect the exit hose from the pump and see if it pumps any ...
...2X 12 AMP Model 8920 06242C. It will not squirt water for the floor brushes, or the hose attachment. What could be the problem? Thanx... Could have a bad pump, also there are solenoids, one of these ...
My bisell proheat 2x is no longer putting out water, what would be wrong with it? those machines frequently have pump problems. test the pump and replace if bad. let me know if you need a part #
bad punp I was told that when the pump goes out that there is another part that fails most of the time is this true thanks sean pumps in the unit you have seldom fail. front water tank could be warped
...2x 2400 will not spray water or cleaner If you can hear the pump going when you try to apply then you have a clog. If the pump can not be heard I would start with that and make sure all connections ...
92 why wont it pick water Could be a clogged pickup tube or a bad pump.
...pump has gone bad. This is a huge problem with bissell and has been for years. If the unit is less than a year old I would take it back because even if you replace the pump, it will not solve the ...
...pump bad or both. Usually the heater take it apart. Becareful of the VERY VERY small red o ring around each screw. You can take it apart and clean out all the build up from the cheap soap everyone ...
331 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
