...smart mix knob(underneath the top cover) set the smart mix valve in the wtaer only setting, then put the top back on. Turn the smart mix valve to make sure it is turning like it should, then ...
Question about Bissell Vacuums
...smart mix piston, new pump? My bissell proheat was not dispensing shampoo and the water was only coming out of one side. I found a clogged spray hose. I'm not sure about the dispensing of shampoo. I ...
...smart mix valve turning and stopping where is is supposed to, if it turns all of the way around, then it is broken inside the top cover. Try replacing the smart mix bottle insert and cap asm part ...
...smart mix plunger bissell proheat model 7901 procedure for proper installation Hi, Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. Bissell ...
...Smart Mix' (shampoo) bottle is on the operator's right in front of the machine. Remove it and fill it with Bissell shampoo. 6. Shampoo is automatically mixed with the water as you dispense it ...
smart mix what is the trick to connecting the smart mix? Glad you did.
Smart Mix selector Replaced the Bissell Proheat Pump on Model 1699-P. My problem is I can't get the Smart Mix selector to engage the control valve when I reinstall the cover, any suggestion would be ...
...smart mix valve to about the half way point so the piston won't fall off. When you are ready to re-install the top cover, just before pushing it all of the way down, turn the smart mix valve to the ...
...smart mix for the cleaning formula would not dispense formula.I called Bissell consumer services and was told to take it to Starks Vaccumn in Sherwood, Or. That was on 10-30-06 They said that it was ...
...smart mix knob from the bottom, just before the top is on, put the smart mix knob in the water only setting, then push the top down. You could also have pinched a line if any of them aren't in the ...
256 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
