...loose. Inevitably you'll have to remove the sole plate and/or the rotary dial which may be screwed down. If it has cracked then you may have to seek a replacement. Dont forget to rate this
...plate underneath that covers the rotor brush wheel. It used to be you didn't need a screwdriver, but these days you do. Then remove the rotor brush (it will lift right out). You should also see the ...
...plate where the roller brush is, then check the top of the hood - there should be three screws, two at the front on the raised section of the floor brush top and one below the hose if it sits to the ...
...plate (ie where the spinning brush sits) have to be undone in order to get to the drive belt. However if you have blue/red/Harmony Glider type model, the drive belt location is on the top of the hood ...
...plate and clean your machine thoroughly, using brush and vacuum (notcompressed air) and oiling per the instruction manual. Put it all backtogether, putting in a 80/12 needle, correctly oriented. Hang ...
...rotary brush,check for the belts tension.It should be enough tight to drive the brush.If not ask for spare part from Miele in your country.After cleaning please put it back in order.To test ...
73 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions