...water tank) doesn't dispense water at all. it worked fine a few days ago but not it doesn't. what does seem to be the matter and what should I do to fix it? water is not coming out or sucking up ...
...fix, of course, is to always remember to dial to water only when you need to add cleaning solution.. beth Here is a troubleshooting link at Bissell. for your 1697-7 Powersteamer Pro Deluxe Vacuum. If ...
Question about Bissell Vacuums
...fix this? Check the Water Tank Filter on the cap of the tank (it looks like a screen) If clogged then the tank holds air and can't suck up water. You may want to check your User's Guide to see if ...
...water form the bottom and i wouldlike to know how i can fix the problem on my own. You will just have to take it apart to see if a hose is loose, came off, or is cracked. Eureka vaccum clener not ...
Question about Bissell Vacuums
...water. How do I fix this? find a video on how to disassemble this on youtube and you may learn a little about how it works, how to take it apart, and most likely clean anything that causes this ...
Question about Bissell Vacuums
...It leaves the carpet wet. Hi, Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem. Bissell Proheat Upright Wet/Dry Vacuum Problems heatman101 ...
...fix your BissellProheat Vacuum Problem. Bissell Proheat Upright Wet/Dry Vacuum Problems heatman101 vxbv mine is pushing hot air out the bottom and not sucking up the water. the spray works fine but ...
Question about Vacuums
...fix. Vacuum pulls water for about 20 to thirty seconds and then the suction cuts out. Drain the vacuum each time. A ball inside the vac stops the flow before the water level allows water get sucked ...
...fix it. Thanks Dennee make sure that the two slide-tabs on the front of the machine are all the way down so that they can hold the front see-through cover down and create suction at the front. I did ...
Question about Bissell Vacuums
...dirty water back up, how do I fix this Check that the tank and the nozzle cover are properly installed. If the motor is running, it should be sucking. If it's not, there is a seal that isn't ...
542 questions posted
Usually answered in minutes!
390 Questions
261 Questions
302 Questions
244 Questions