...brush roller itself may be warped, or the bearings may be starting to wear out. Replacing the brush roller may solve the entire problem. Good luck. Mark I imagine the roller is wooden and bent , ...
Question about Euro-Pro Vacuums
...brush roller freezes and indicator light turns red turn on power, brush roller light comes on green and brush starts to roll for about 3 seconds and than brush freezes and light turns red try turning ...
Question about Hoover Vacuums
...roller/brush on the bottom of the unit has a metal bearing inside the roller/brush that can become clogged with hair (both human and pet hair) which effects performance of the unit. It?s fairly easy ...
roller brush. If the roller brush's bearing have locked up, and the brush is no longer spinning, this is going to cause the clutch to make that horrible grinding noise, and a lot of people incorrectly
...brush roller has stopped moving. General maintenance to your vacuum is crucial and will help it work at peak performance. First things first lets focus on the brush roller. Unplug the vacuum and turn ...
...brush roller is loose and making a loud noise and keeps reseting. I Have the same problem. It is the end of the brush roller opposite the belt end. It binds up and gets hot, then melts the plastic ...
brush roller is jammed or foriegn object obstructing brush roller. Remove the sole plate by turning the 3 plastic screws to unlock pull off sole plate now look for anything that is stopping brush from
roller brush. Take the belt off of the roller brush and see if the brush spins freely, if not, remove the roller brush and check both ends to see if one end is stuck. If so you need a new roller brush
...roller brush itself might be bad. Try holding the roller brush holding just the end caps with your finger tips, and spinning the roller. Does the roller spin freely? If no, this indicates that your ...
37 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions