Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum "cause carpet cleaner dispense" Questions

Ad

carpet cleaner comes on and the heat source is working in it, but the machine is not dispensing the water and cleaning solution. It does have consistant suction. What could cause this type of problem?

Ad

Question about Hoover Vacuums

1 Answer

carpet cleaner will not dispense water it was working until about the third time I emptied it and refilled it. checked all the values and lower plastic filter is not clogged. what is the possible ...

Ad

Question about Bissell Vacuums

1 Answer

carpet cleaner It is not dispensing water when on the floor but the attachment is dispensing water It sounds like the heater may be plugged. This is a problem for an experienced technician. The heater

...cause of problems with any of the carpet shampooer, steam cleaners, etc., is that they are stored with unused materials in the tanks and hoses. They are seldom cleaned, rinsed, or receive any type of ...

...carpet cleaners that have the water heating feature stop pumping water at one time or another. Make sure the belt is still on the pump and if it is then the problem is probably in the heater core in ...

...cause a Bissell carpet cleaner to not dispense water. First thing to check is the belts if your machine is a Pro Heat. The flat belt goes around the motor shaft and the pump. As the motor runs it ...

Question about Bissell Vacuums

2 Answers

...carpet cleaner does not dispense cleaning solution Check to make sure that the back end of the top housing is tight against the bottom, Sometimes they break loose. Make sure that the gasket at the ...

...to clear my line.. and it doesn't hurt the carpet. check the little filter on the top of the machine (mine is on the right side) if it is full of lint, etc and blocked it will not dispense or pick

Question about Bissell Vacuums

1 Answer

...cleaner will not spray on the carpet. I can clean a whole room and no cleaning solution will go out of the bottle to the floor. I am just cleaning with hot water. I noticed that the plunger in the ...

carpet seems damp but not soaked, still a bit troubling no waste water...what up ? You do not have the needed vacuum on the dirty water intake. Possible causes are: 1. No adapter sleeve in the back of

Not finding what you are looking for?
Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum Logo

315 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...