Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum "bissel 2 put back" Questions

Ad

...put the cover back on my Bissell 8910 Proheat 2X Pet. I had so much dog hair in my bissell, I tore it apart. Now I can't get the cover back on correctly. There are 2 plastic things with springs on ...

Ad

Question about Bissell Vacuums

1 Answer

...you may have to carefully pry on the sides until it loosens up. Then when you put it back on, at the top are 2 tabs, make sure they snap into place then lower the nozzle and put the 2 screws back

Ad

Question about Bissell Vacuums

2 Answers

...2 white pins on either side of the hose at the end near the base.BE CAREFUL NOT TO PULL ON THE HOSE ITSELF but on the plastic where the hose connects.Flush water thru the hose to clear out all the ...

...back up like it should. Also when I use the attachments dirty water runs out the the hose when I am done. It's used a lot, I shampoo all the carpets about 2 times a month and I shampoo the funiture 1 ...

...2 on a Pro Heat. The pump belt which is pretty straight forward to put on. If it's the brush belt you will probably have to take the brush off. Re-rail the belt and then put the brush back in the ...

...2 inches long) and bent thin metal piece under the motor. Now that I'm trying to put everything back together, I can't quite figure out how to orient that piece in order to make it fit!! Anyone have ...

...2, but when i put it back together, the brushes wont move...the belt tries to move, but the rubber just burns.. something is binding ... i dont know what ... you will have to remove all parts and ...

Question about Bissell Vacuums

1 Answer

...put it back in various selection and cant fix it please help ASAP liquid bladder will not release water. Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service ...

Question about Bissell Vacuums

1 Answer

2") you will see that you can lift the knob slightly out of the way then you can slide the piston into place. leave the knob at that position to hold the piston and slowly put the cover back in place.

Question about Bissell Vacuums

1 Answer

put the water in the bottom, where does the dirty water go? Can I get a manuel sent to me? 1. Release the handle and lay the machine handle back to access the tank. 2. Remove the tank from the base of

Not finding what you are looking for?
Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum Logo

315 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...