using an always-on connection that doesn't require a username/password (such as basic digital cable) or are you using a PPPoE connection that does require
authentication (such as DSL)? If you're using basic cable, you should be able to bypass the setup and configure it manually if nothing else.
more...
need a USERNAME and PASSWORD from your ISP when you set your modem to bridge. This username and password will serve as your connection
authentication. Once the modem is already bridged you have to set the INTERNET CONNECTION TYPE on the router to PPPOe(that is where you type your
more...
MAC Address
authentication How do I set up the DI-704, DI-707, or DI-713P to connect to Roadrunner, Cox.net, AT&T-BI, Charter, Adelphia, or any other ISP that uses
more...
have thought that if that was the problem then the mac would only run at 54 also. Regards Ian Problem solved, changed the security
authentication to wpa-psk and the encryption technique to aes instead of tkip. Now getting 300mbps steady with the n1 card on the xp laptop and
more...
WEP radio buttons. For WEP encryption select 64, 128, or 256-bit encryption. For the Key type select HEX. If you have an option for
Authentication type, select Shared Key.
Step 4 Select Key 1. Enter a Hex encryption key that you make up. The length of the encryption key
more...
8. Enter the following details: PPP Username: Your bsnl username (no need to add dataone.in) PPP Password: Your bsnl password PPPoE Service Name: DataOne
Authentication Method: Select CHAP Click Next 9. Check the Enable IGMP Multicast Option Check Enable WAN Service Option Enter the Service Name as Dataone 10.
more...
settings Wizard and manually input the following.
Virtual Circuit Identifier - VCI38
Virtual Path Finder- VPI0
Encapsulation Mode VCMux
Authentication Type CHAP
Protocol RFC 2364:PPP over ATM (PPPoA)
Modulation Type G.DMT or Auto
Primary DNS Server 212.74.112.66
Secondary DNS Server
more...
Sponsored Links