...dsl modem network cable attached modem icon blinks yellow, wired & router solid blue Are you trying to set up the router ? First make sure that your computer is online when connected directly to ...
amp; connections. You should have: 1. cable-modem connected to cable socket (or DSL-modem connected to telephone wall-jack); 2. router connected via Ethernet cable to the cable-modem (or DSL-modem) 3.
...cable and a PC or dumb terminal, enter the following string into the modem. type in: at modem responds with:OK type in: at&F &B1 &A3 &I3 &S1 S13=1 &W0 modem responds with: ...
...DSL-modem has one Ethernet port, then use an Ethernet cable to connect from that port to the WAN port on your NetGear router. Then, the router will provide both "wired" and "wireless" connections to ...
...amp;#195; i Ä?ặt của tôi cho d-link DSL-2640T ADSL2 + Router go to D-Link - TechSupport FAQ thumbs me ...
dsl modem is in bridge mode or pppoe method if it is in bridge mode ask the isp vendor to change the modem into bridge mode which prompts you for username & password try this it resolves the issue
amp; broadband light is off plz help me imagiatally You need to check with your DSL provider. What the router is telling you is that it is not getting a connection with your internet provider. Contact
...amp; drivers or the DSL-2740B which appears similar to your product description http://www.dlink.com.au/tech/Download/download.aspx?product=DSL-2740B Not sure if you need these. Your computers will ...
...and got right on why wont the dlink work if you have one dsl modem & one router means you have to cofig dsl modem in bridge mode and router in dynamic mode.if you have any dout call me ...
...Dsl led blinking & sometimes totaly off. Contact your ISP immediately- the issue you have is called no sync. Basically with the DSL led going completely off- that would point to a bad modem, ...
457 questions posted
Usually answered in minutes!
175 Questions
157 Questions
144 Questions
131 Questions
127 Questions