Sennheiser Evolution G2 100 Series UHF Handheld Microphone System (A) EW135PG2A Microphone "lapel mic" Questions

...lapel mic wires disconnected I have a Audio Tech at831cw lapel mic that the wire has pulled out of the connector. Need to know how to reconnect wires normaly when pulled out the cable is also come ...

...mic but I want to use a lapel type. Wireless systems can be purchased as either lapel or handheld systems. Talk to the dealer that you are purchasing the wireless from and let them know you want a ...

My Apollo wireless transmitter WM-120 for Apollo PA-6000N and lapel mic make too much noise. Get a unidirectional mic on a headset. It will make a huge difference

...lapel mic is working fine. I changed the battery in the hand held mic, but that didn't help. Make certain the mic and the receiver are in the same exact frequency band. There are stickers on ...

mic troubles mic cuts in and out seams to be mostly in the morning but sometimes in the evening. It's not the battery or cable connection, checked both and replaced the battery anyway. check antena ...

...lapel mic is working fine. I changed the battery in the hand held mic, but that didn't help. The handheld is in a different frequency band than the receiver. There are stickers on both that saw ...

...lapel mic buzz when you touch it. ONLY when you touch it It has a bad earth (ground) connection. If you cannot repair it Go to Shure.com look under support, you can get a price list and where to ...

...Make sure the receivers are always close enough to the mics to hold a reliable connection. Wireless Lapel Mics (Clip-on) are more troublesome, as they are generally consenser mics which are more ...

all four hand held systems failed during a performance we have 4 handheld and 4 lapels of the g2 100 range, in the rack they are set up with two splitters but per splitter we have only 2 hand helds ...

...mic 6 to 8 inches below your chin clipped to the lapel area. It seems in this case it has more to do with EQ and speaker placement. If you can stand behind the speakers while using the mic. The sound ...