Danby DPAC8020 Air Conditioner "power not working" Questions

Ad

Question about Danby Heating & Cooling

1 Answer

...working proprely. The 'power' button is changing the mode (as of the 'mode' button) and the button that controls the ventilation (high or low) is simply not working. Everything works just fine if I ...

Ad

...off the main 110 breakers to shut down the converter. Once all the power was turned off the LED light went off. When I turned the power back on the remote was working fine. Hope this works for

Ad

Question about Spyder Heating & Cooling

1 Answer

...automatic windows wont roll down i redid my door speakers and reconnected everything correctly. my power controls wont work on the drivers side only. i can only move the drivers side mirror. the ...

...working it indicates a power board failure , power failure or control panel problem if it is a window (box ) ac then it will be the power board problem in either case it is a job for a ac technician ...

Question about Fujitsu Heating & Cooling

1 Answer

inside work blows air but not to cold but outside does not work well it is not a power problem, because you get your power from the indoor from the outdoor in some cases . check your contactor at your

Question about Frigidaire Heating & Cooling

1 Answer

working doesn't tell you that the electronics are getting power. It is possible that the power cord is bad. Once you have tested the unit and the unit is actually getting power to the display, then it

...the power off at the box for 30 minutes - no change. Remotes are working fine. Any ideas ?? Check for power at unit . If there is power to unit check for blown fuse on circuit board or bad board

...after waiting only a minute or two after turning the mains power off but with no change. So turned the unit off at the mains power and then fired it up about 2hrs later and it was all working

Question about Soleus Heating & Cooling

1 Answer

...working. I am getting power to the contctor and the pressure switch is working i am not sure what else to check. can anyone help If there is power to the contactor, then the compressor must work, if ...

Question about Haier Heating & Cooling

1 Answer

Power surge/Control Panel window unit. Power surge occured this am. Panel will not work, no lights. Temp remains on 88, this shows, but cannot adjust. Have tried re-setting on plug. Fan works, no cool

Not finding what you are looking for?
Danby DPAC8020 Air Conditioner Logo

223 questions posted

Ask a Question

Usually answered in minutes!

Top Danby Heating & Cooling Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Danby Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...