ONE CHANNEL WORKS ONLY ONE CH WORKS As stereo amps are two mono ones put together you can use the good channel as a guide to tell you what the bad channel is not doing. You just need an insulated tool
...channel not working. Not output. Tried speaker cables in rh channel and speaker works. Has been crackly for some time but turning the volume control right up used to activate the left speaker but now ...
channel two stopped working all together. Had a professional sound shop work on amp and after a $200.00 charge the tech said he had to re sodder the connections in channel two. Got it home...hooked it
i have the xp 300 and in stereo mode it only works on one channel or the other, not as 2 seperate channels If you are saying that it only works on say the left channel in stereo mode, but both ...
Question about Yamaha Audio Players & Recorders
...channel working. This means that since stereo amps are just two mono amps joined together, you can use the other channel as a guide to what the other should do. You don't need to look at the power ...
Question about Crown Audio Players & Recorders
...CHANNEL STOPPED WORKING CAN I GET IT FIXED The power amplifier section should be troubleshoot for shorted output IC or transistor. If you wish to get some details; visit the site linked here. Pull up ...
channel working. Only high static and scratchy music comes out when turned up on single channel. Problem happened before about five years ago. Cleaned unit but could only turn knob up 3/4 on that side
Question about Adcom Audio Players & Recorders
channel is not working... How do I fix one channel dead (with thermal protection LED on)?... All 4 other channels work fine, but the Right (middle) channel is completely dead. (No sound output at all;
...channel to both channals when in mono. However it does mean that the Power Transistors (or whatever does the main output) is working on both channels. Therefore the dead stage is in the pre-amp part. ...
...working, only one channel worked at a time. With amps loss of sound is mostly connected with the devices found on the heat sink. Some amps have transistors for each channel. Others have a single IC ...
18 questions posted
Usually answered in minutes!
86 Questions
43 Questions
23 Questions
17 Questions