Kenmore 62622 Microwave Oven "stop 6 seconds" Questions

...6 seconds precise when on microwave setting. Happened all of a sudden. If it stops after 7 seconds, it has a problem with the inverter. Due to the lethal voltages used and produced in inverters, I do ...

...6 seconds it stops and 'err 5'comes up on the display. Any ideas? Cooke and Lewis model no CLMW10IX if this was purchased from the likes of B&Q, at the time of purchase, the retailer must ensure ...

...6-10 seconds, at first I thought this was saftey device. the microwave will now not work it cuts out all the time after 6 seconds. Is this an easy fault to repair or should I be asking Panasonic to ...

...If the microwave runs for a few seconds and stops the thermostat might be defective. Watch our video on testing thermostat Step 3:Step 4:Step 5:Step 6:use the DVOM tester and fix it. God bless ...

6 seconds and kicks off According to a recent report we received, if it stops after 7 seconds, it has a problem with the inverter. Due to the lethal voltages used and produced, I do not recommend that

...6 seconds and then stops other oven cooking methods works OK. If it stops after 7 seconds, it has a problem with the inverter. Due to the lethal voltages used and produced in inverters, I do not ...

...6 years... until now. It runs for several seconds on any setting and then just stops as if it never started - no blinking lights, no beeps, no visible change. If I set it for 1 min, it just goes back ...

...6/7 seconds. If it stops after 7 seconds, it has a problem with the inverter. Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these. ...

...approximately 5-6 seconds There should be a buzzer sound that is made by a piezo. If it isn't sounding correctly then it must have a bad solder joint on it, or the ic that controls it is ...

...6 years. Seems like the display panel went bad. You can check for sure by unplagging the unit for 45 seconds and plugging it back in. If still no display order a new display panel. Please rate if you ...