Kenmore 62622 Microwave Oven "control panel problems" Questions

...control panel, which is now visible with the grill removed. Lift the control panel up to release the tabs securing it in place. Move it away from the microwave. Look at the rear of the control panel ...

...control panel to troubleshoot no power failure condition? My Mom's Whirlpool RM278BXV-4 built-in microwave oven quit working soon after she pushed the start button. Now it has no power at all - no ...

...A MOMENT WHEN DOOR IS OPENED & CLOSED, BUT NOT STAY ON. ANY ADVISE bad control panel.. all power is routed through the control panel.. if your having a problem like that i would replace the

...control panel for the microwave. The oven will operate but the microwave will be totally dead (no light, no clock). Turn off the breaker for the oven at the fuse box (30 Amp double breaker). In order ...

...control panel not working. how to check what is wrong? The control panel is completely blank with no display. However, the microwave internal light is on when door is open! Open the control panel ...

Control Panel Touch Screen Goes Blank MY Sharp R-340D unit is about 3 years old. It worked perfectly until about a month ago when the Control Panel screen went blank. When I unplugged the unit and ...

...Control Panel Removal Procedure Hi, This problem probably applies to the general lot of GE Spacesaver Microwave units: Please explain in detail how to pop out the Control Panel (containing the ...

...control panel seems to work-- you punch in the buttons and it starts counting down the minutes, but nothing happens except for the clock to count down. The model # is JES1358WL 01. The serial # is TL ...

...control panel doesn't function properly. I know the 2, 3 and STOP/CLEAR buttons don't work when depressed. When first plugged in the microwave asks for the time of day to be set. When the time of day ...

...control panel not working I had the same problem , it was finger touch control panel, when I cleaned with spray then it worked for some days . Finally to get ride of it , I changed control panel with ...