Kenmore 80412 Microwave Oven "install door" Questions

Ad

Question about Maytag Microwave Ovens

1 Answer

...the door being careful to catch the glass. Clean the area where the tape will go with glass cleaner or alcohol. Allow to dry and buff to remove oil and grease. Install the tape and glass.

Ad

install a new door ONLY on my built-in GE Profile Microwave/Convection. The bottom screw of the handle is out and GE said it cannot be repaired or replaced and that I need an entire door. I have found

Ad

...door handle. Just remove those and all broken plastic debris. Then install your new handle. Be sure to tighten the two screws on the backside of the new handle before you install it (they may already ...

Question about Kenmore Microwave Ovens

1 Answer

...Install the new door. Make sure the wall oven door hinges are aligned to go into the rectangular wall oven slots. Place the hinges into the slots. The hinges should "catch" on the slots ...

Question about KitchenAid Microwave Ovens

1 Answer

...door. What part do I need? How do I get inside to install it? This is a crisis as my Poodle Poco has to have his good stuff warmed! Thanks for your help. I downloaded a parts schematic of the door ...

...door to install to replace the old door that has a cracked handle and plastic pieces cracked and falling off. I need help in taking the old door off and putting the new one on. The part department ...

Question about Sharp Microwave Ovens

1 Answer

...window of the microwave door? The cost online for a door appears to be about $150 with shipping. An installed over the range microwave would with installation would probably run me $300-400. The ...

...not closing properly so will not work I have a GE Microwave model JVM119OAY 001 from 8/97. Just installed a new door. The light does not go off and the switch thinks the door is open so it will ...

door apart to install handle. Look really good on inside of door. You should be able to remove the inner panel and then have access to bolts for the handle? If not... Epoxy is your best friend at this

Question about Kenmore Microwave Ovens

1 Answer

...door to begin install/replace - don't want to break panel by prying up a piece - and there are no visible screws Most of them you do have to carefully pry. You look on the inside of the door and ...

Not finding what you are looking for?
Kenmore 80412 Microwave Oven Logo

94 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...