Panasonic NN-H275 Microwave Oven "fuse blowing" Questions

fuse after blowing the fuse?..what happened next?...did you replaced the fuse and it start running again or if you replaced the fuse, it will blow again? if it is always blowing the fuse, you may have

works a few seconds then the fuse blows. model#JES13845F works a few seconds then the fuse blows.model#JES13845F Fuse holders sometimes become weak due to heating. If the fuse is not held very tightly

...blowing my fuse, but would work again when I reset it. Now, nothing. Could it be the microwave fuse? It was having issues and kept blowing my fuse. I kept resetting my fuse and it would work again. ...

OVEN BLOWS FUSE EVERYTIME I TURN IT ON the fuse blows only when there is a short and it is overloaded, so check it for shorts before replacing the fuse and turning it on!! once the short is cleared ...

Replace thermal fuse for LG microwave LMV1813ST If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won't start. To determine if ...

...blowing does the fuse in the plug blow or the internal fuse if it blows the internal fuse it could be one of the door switches two of the switches have a red button on them and one has an orange ...

...blowing fuse replaced the magnetron but still blowed the fuse, It sparked and blew the fuse. Disconnect connections at primary of the power transformer and try with a good fuse. If the fuse blows ...

fuse whenever i start my micro wave it always blow the fuse I replace fuse but blows when start up happens The Interlock Monitor Switch is an added safety check on the Primary and Secondary Interlock ...

...KEEPS BLOWING THE FUSE INSIDE THE MICROWAVE WHEN I CHANGE THE FUSE IT WORKS FOR AWHILE THAN BLOWS AGAIN CHECK THE FUSE CORRECT AMPS OTHER WISE BLOWS THE FUSE AND CHECK ANY SHORT CIRCUIT IS ...

...fuse blowing, There are 3 possibilities: the High voltage trafo is defective, the voltage doubler diode or the capacitor are defective. You must be VERY CAREFULL when working on these parts: the ...