...hose connector. When I insert it into the drain hole it is blocked by the back of the dehumidifier. What iw the correct way to insert? Can you send a better diagram? The drain hose connector MUST be ...
...hose connector. 3. Push hose connector tightly to the drain-hole on Rear Grille with the arrow on the tab pointing UP. The hose attachment will accept a standard garden hose fitting. Do not over ...
Question about Danby Dehumidifiers
...hose connector, that doesn't fit? THX Mike Strange but true. I had tried to use a steel/brass connector from a garden hose. Although the same size as a normal garden hose connector when used with the ...
hose connector we bought a Lg Dehumidifer at Home Depot but the hose connector keeeps falling off. Is there any way that you an send us another one for our unit. It has been an on going problen since ...
...just screw off the hose connector. You may have to carefully drill a 1/4" hose in the center of the threaded hose connector, once the cap is unscrewed. Some models require that, others
...hose connector and place it in the hole until it won't go any further (you can feel it hit the front of the water bucket). The instructions will show pressing the tab of your hose connector into the ...
...hose end connector to continue bucket only useage. The hose connection was ok, but, the hose itself was a lttle, I mean little bit higher than the connector, and as a catch all to not allow flooding, ...
...unit. 2. Connect a garden hose to the threaded hose connector. 3. Push the hose connector tightly to the drain-hole on the back of the unit This is explained on the manual on page 12. Hope this ...
hose connector. 2. Remove the drain-hole cover. 3. Push hose connector tightly into the drain-hole on Rear Grille. 4. Press the hose down and make sure the "Arrow" on the tab is pointing upward. NOTE:
36 questions posted
Usually answered in minutes!
54 Questions
39 Questions
33 Questions
28 Questions
20 Questions