drive coupling is broken. In the bottom of the microwave where your turntable is, underneath that is a small drive coupling that the motor shaft pushes into. if the motor doesn't turn or the coupling,
Question about Panasonic Microwave Ovens
...drive coupling or a sluggish motor. The coupling has a D shaped hole inside to keep it from Slipping on the shaft, so Try to turn the coupling by hand, if you feel it slip or it is very easy to turn, ...
...drive coupling unscrews, it will come off in the same direction that it turns when it runs. Look on the bottom of the unit and youll see the motor shaft, you can put a socket on the bottom to hold it ...
Question about KitchenAid Microwave Ovens
...microwave oven combo.. the microwave turntable will not turn only clicks try to turn the coupling, either stripped broken coupling, or bad gear in drive motor. should not be able to turn by ...
Question about Microwave Ovens
...If you have power there, it is probably a stripped or broken plastic drive coupling. To replace that you have to remove the motor and then lift the drive couplin out from the cooking cavity
GE MICROWAVE TRAY (PLATE) WILL NOT TURN 1) small motor defective repair or replace2)plastic drive coupling+ring and rollers you must shure is working properly, fix it.God bless you
...coupling. Pull the plate off and under it, in the center of the oven is a small plastic piece that drives the plate. This coupling will pull straight up. Look to see if it split down the stem, if it ...
...drive coupling in the bottom of your unit. If it spins quite easily, your coupling is probably broken. If it doesn't turn easily, do not force it, you could break the coupling if you try to turn it ...
...fuse to this unit and also if the relay engages the power to the magnetron. If not check the relay drive and replace the drive transistor if faulty. Credit if the advice
326 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
308 Questions
257 Questions
258 Questions