Volfenhag ZX-8300 Car Audio Amplifier "lpf low pass filter" Questions

lpf" stand for High Pass Filter and Low Pass Filter. They do exactly what their names imply. They allow frequencies above or below a specific setting, while blocking or attentunating frequencies below

Turn vocals off If its a sub amp.....There should be a switch that says lpf/full/hpf....Make sure its on lpf (low pass filter....)

...LPF lower. This is the low pass filter and its setting only allows frequencies below its setting to pass. Also you might have a switch that needs to be set to LPF. hi mc i think you need a car head ...

...LPF. Low pass filters are capable of passing low frequency energy. As far as the impedance of your amp goes check with the manufacturer for proper the proper load. What speaker config do you have? 2 ...

lpf-off-hpf switches control the "low pass" and "high pass" filters. When driving full-range or component speakers the filters are usually operated in the "off" position to send all frequencies to the

...Low Pass Filter (LPF) that cuts off the amp output above the set frequency. A bass system usually cuts off below 400 HZ and more often 200HZ. A good, rattle your car bass note is in the 25-80HZ range ...

...low pass filter (LPF) for the sub. Make sure it is at 80 or below, on many decks you have both a "rear" and "sub" outputs. Check the back of your deck and see if you plugged it into the rear out, if ...

s with dual voice coils. you turn your low pass filter (LPF) on the amp down to your desired frequency, but the box you have it in will drasticly change the sound (if you werent aware) hope this helps

...w/ 2x12" 800w max subwoofer Hi Rain32, The output channel with the sub Needs to be set to LPF, " Low pass Filter" This allows your sub to only see 40 to 250HZ, which is best for a SUb like

LPF (Low Pass Frequency). Then there should be another "knob" that controls the frequency. At the least, you want your sub amp to be tuned below 50 Hz any lower is up to your ear. I hope this helped.