Toshiba E-Studio 242 Digital Copier "printer close side cover" Questions

...is a new printer, changed it under warranty, but if this problem occurred now you have to find a problem, why this door won't close correctly. the cover switch is located on the left side if the ...

...side of the printer.and then check out the error must go away.if still the same error then its quite possible that sensor is broked as it very very delicate .so it needs a technician to replace the ...

...close cover E" ? The Exit 2 interlock switch is either broken or off it's base or defective. If you open up the top door on left side of print, there is a push button switch that mounts on the back ...

...close side cover" message? The side cover is located under the bypass unit... U need to close it properly... please can anyone show me the screen shot of side cover please am having that same ...

Close R Cover but I dont have the R Cover on the printer it was given to me without it is there any way that i can bypass this look at the right side. the 'r' cover is most likely the right side cover

...close 1st side cover,how do i clear the massage. pliz help me. 1st Side cover is front cover.The cover which you use to open to install or check toner bottle.When you close that cover and machine ...

...into the printer until it snaps into place. 7. Close the front cover. Make sure that the cover is securely closed. If it is not firmly closed, printing errors may occur. Hope this helps! Best of

PRINTER BACK SIDE COVER IS OPPEN SO PLEASE CLOSE THE BACK REAR COVER & CHECK THE PAPPER JAM IN REAR COVER & AFTER CLOSE THE REARE COVER THEN AFTER SEE THE ERROR YOU CHECK THE BACK COVER SENCER

...close right side cover is showing on the screen display but door is closed i have already replaced the door switch and power supply board and main mother board and tray control board.kindly advise ...

...close side cover, where is side cover? the messages says close side cover but does not specific which side? this is the side cover opening /closing sensor try to clean it and see the masege remove or ...