Rowenta Effective DX1900 Iron with Auto Shut-off "getting hot" Questions

...getting hot. thermal fuse blown up due to overheat inside change the thermal fuse inside iron that's why not getting hot. thermal fuse blown up due to overheat inside An iron should be ...

...getting hot The thermal cutoff device blew and must be replaced. It acts like a fuse when the iron gets too hot. Thay are very cheap and it would be well worth replacing. Hope this was helpful. ...

iron will not get hot iron will not develope steam it does not get hot enough I suspect that the Irons heating element is coated with calcium, try using a couple of tablespoons of vinegar in a glass ...

the iron wont get hot---what does it need to be set at to get hot? did it work when you newly bought it??

i have a tefal pressing compact steam iron the steam is not working it still gets hot They usually don't. The water has to get hot before you have steam.

My iron its not getting hot its on but not get hot the fuses may be burned u will need to repair it :(

handle gets to hot after about 5 mins useing this iron the handle gets very very hot and is to hot to touchmany thanks keith you just open it and look for whats wrong in your iron.... or the handle in

iron does not get hot The iron powers on but never gets hot on any of the settings. Happened suddenly in the middle of use. Mine just did the same thing, I think the controller fried. There is aburnt ...

...getting hot. Clean the hot plate with a fine needle or other fine object and then put in a mixture of vinegar and water and let it steam out. To prevent future mineral build-up, use half distilled ...

should the cable from the machine to iron get hot is the large cable from machine to iron carrying water and should it get hot Hi, If the iron is a steam-iron with a steam tank in the base-unit, then ...