Sony DSR-11 DV / Mini DV VCR "cassette tape deck repair" Questions

...cassette loading mech is not accepting the tape It could be miss-aligned in it's position or one of the sensors is defective or the motor is bad A frayed/ broken flex cable in the cassette ...

...cassette flap lifts fully, allowing the tape to go into the deck as this is a small lever mechanism. When the tape goes so far in, it activates a switch to start the loading motor this is usually a ...

tape got stuck in the drive. Any suggestions, before I spend $50 to send this to JVC repair in Aurora? sounds like a defective cassette housing, but i have seen problems with jvc decks and camera when

...down the eject button. Also, now when it does eject the tape, the tape comes out slightly crooked. What can I do? probably a bent cassette housing in the deck - time to seek out jvc authorized

...tape but the deck is steel not working. When you connect it to the power, the power light is green for few secconds and then turn back red This happens often in my business. Sony DSR is the most ...

...tape cassette on the left of the machine , past the control and sound head also on the right with a roller to effect good contact on to the the head rollers that then pass the tape around the head in ...

...cassette so you could cut the tape and probably pull the VHS out of the unit. 4) This deck sounds like it will need some cleaning and attention. Might be a good idea to take it into a qualified TV ...

...cassette assembly, only remove the top plate. Also check the pinch roller grease, make sure the pinch roller moves freely. I am experiencing the same exact problem with my ag dv2000 and after reading ...

tape is loaded. C3123 otherwise time code is at 000000 as should be when deck is turned on. any ideas? no fix on this end, can I send it in? why isnt it listed on the sony site (!) C:31:23 on a DSR-25

...tape formats, I will try to describe a basic procedure for you. First, it's not a major problem and can be solved in one of 2 ways: 1) The simplest way is to replace the Cassette Loading Compartment. ...