shure ur3 and slx4 L4 receiver I can get the frequencies of the ur3 and the SLX4 to match @ 641.500MHz, but why can't I get a signal to show on the receiver??? Those systems use different tone key, ...
I have a SLX4 with wireless SM58 and all is correct. But I have enough and SLX1 body pack and no transmission is possible with SLX4. The SLX light on correctly but no communication with SLX4. Is it ...
unable to syn my slx2 mic to reciever slx4 reciever Make certain it is an SLX4 receiver in the same exact frequency band as the SLX2.
Question about Shure Audio Players & Recorders
Shure SLX4 RECEIVER and a countryman mic. ! We bought this device for our church and now every service in the middle of the service we been getting this static kind of noise all of the sudden?? I ...
is it possible to pair more than one slx2/sm58 wireless microphone with only one slx4 receiver or do I need one receiver for each microphone? You need a separate receiver for each microphone.
overloading receiver Turn down the gain on the transmitter.
diagrama shure slx4 Shure Service can provide a diagram of the receiver. Send them an email at [email protected]
Question about Shure Audio Players & Recorders
shur wireless microphone modl slx4, slx1 not getting sound There are many things that can cause this. Call Shure at 800-516-2525 for the best troubleshooting.
is there a problem if i connect shure slx24/58 to mic input with phantom power 48v? There is no problem. The SLX4 receiver will ignore the phantom power.
Question about Shure Audio Players & Recorders
we have a Shure slx4 wireless mike it cuts out during our service. The signal just drops when this happen the anttena switchs from a to b then signal is lost it comes back on then goes off This ...
11 questions posted
Usually answered in minutes!
136 Questions
60 Questions
30 Questions
28 Questions