...LCD Television TV is DEAD, NO Raster, NO Picture, NO SOUND, POWER IS OK, SIGNAL IS OK, THE POWER LIGHT FLASHES AND GOES OUT AFTER I PRESS THE POWER ON BUTTON, QUESTIONS- - DOES ANYONE HAVE A SCHEMTIC ...
sound left only?Yes,than the long LCD inverter board it dead.This long LCD inverter board help the LCD screen panel to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com
...sound Hi, This is a problem with the LCD's inverter cable, the cable that connects the LCD to the mainboard. Have it checked, reseated or replaced by a certified technician to prevent damage of ...
...LCD TV has a vibrating sound that is getting worse. Any ideas what the problem is. This sounds like a faulty loudspeaker , to help locate whitch one use balance control on remote from left to right, ...
Question about Sharp LC Televison & Video
LCD TV Screen, damaging the tv partially. There is no image at all when connected trough the HDMI input and ther is a lot of noise but no sound from the source. If I connect the coaxial cable to my TV
Sharp LC32D62U sound problem There is no sound in this TV on regular channels while on the digital channels and DVD player it works just fine. What might be the problem? I had the same problem with a ...
...LCD TV model number: LC-37PX5M. Out of the ordinary, i have encountered a problem with it. When i switch it on, the screen comes on for 2 seconds and vanishes off. It just display's a black screen. ...
...sound, power lite comes on about 10 seconds then power and opc lites alternate on and off. thanks RON This problems very common in Sharp LCD tvs.The Tuner signal board have problems,every times the ...
...Sound does work. i have the same issue and after removing the back and doing a voltage test on cp506 and found the 24vdc that was suppose to be there lead me to the back light inverter. a very common ...
30 questions posted
Usually answered in minutes!
228 Questions
121 Questions
69 Questions
40 Questions
36 Questions
