...laptop with my PC? hi, power on laptop with pc???? thats not clear to me... BUT with ur laptop not powering on, try to locate the small lethium battery, and replace it.. that should work.. let me ...
...laptop's power socket could be faulty. Check power adapter's DC plug that connects into the laptop power socket with a multi-meter, the voltage should be slightly higher than the voltage that is ...
...power cord or the laptop's battery is to turn off the laptop, remove the battery, connect the power adapter, turn on the laptop & see if it works. If the laptop works directly from the power ...
Question about Gateway M Computers & Internet
...power to both run the laptop & charge the battery. A very good way to do this is to compare your laptop voltage & ampere requirements (written on a sticker on the bottom of the laptop) with ...
Question about Gateway M Computers & Internet
...laptop using power adapter only. 2. Make sure the power adapter is not defective. Test the output voltage of the power adapter using a voltmeter. Compare the voltmeter reading to the nominal value ...
Question about Gateway M Computers & Internet
laptop. No power. All power cords checked: clean and tight. With battery in: push power button and get red light blink on front; without battery (just AC): push power button and get nothing...not even
...power up The laptop is 18 months old, and has been working fine. The other day it was plugged in and my wife opened it up. The screen said that the last time it was turned off it was not done right. ...
Question about Gateway M Computers & Internet
...power cord or the laptop's battery is to turn off the laptop, remove the battery, connect the power adapter, turn on the laptop & see if it works. If the laptop works directly from the power ...
...Power on your laptop. Allow it to run on battery power until the battery is drained and the laptop shuts down. Plug the AC adapter into an electrical outlet. Insert the appropriate end into the your ...
...laptop power socket with a multi-meter, the voltageshould be slightly higher than the voltage that is printed on the label on thebottom of the adapter. If the voltage is zero or way below the voltage ...
45 questions posted
Usually answered in minutes!
417 Questions
257 Questions
92 Questions
65 Questions
60 Questions