...past few months) the TV has been attempting to power up (can hear the fan running, and the screen slightly glows), then turns off and I have a constant lamp blinking light. After going through this ...
...it. There may be an adjustment to compensate for loss of brightness by boosting the high voltage slightly that can be tweaked but the also share another CRT feature (or weakness); the phosphor ...
Question about Akai Televison & Video
...perfectly. In my case, I opened the Akai flat screen and found the 3 capacitors and they were slightly bulged on top. Using a soldering iron, I removed enough solder to pull them out of the ...
HAVE GOT A SWISSTEC 15 INCH TV BUILT IN FREEVIEW, BUT CA NOT GET ITV 1 OR CHANNEL 4 ON IT. HAVE TRIED RETUNNING BUT NO GOOD The model number would usually be on the back of the TV but in this case ...
Question about Sony Televison & Video
...on my TV since my captions were covering my cable menus, but it was the cable. I hope this helps. Slightly different solution: With TV ON... Cable box OFF... hit menu button for cable box ONCE. ...
...side. If you look for three green capacitors grouped together around the middle of the board and slightly off to the right, you will probably see one that is bulging out at the top. This is most ...
...slight that it wasn't even really apparent until we scrutinized each one. The two that went out on ours were the 2 located in the upper left corner of the board, they are 1000 CU 10 V cap's. We took ...
...46" led 3Dtv and mailed my info today hopfully this will go smoothly so far the tech support was very nice other than a slight language gap, i will try to share my experience after recieving the
...a Samsung HLP 5674wx/xaa and i have NO PICTURE and just sound , in the back of my tv there is a slight picture on the wall in the back of the tv ? Solution #2 posted on Aug 15, 2009 fastrepairs ...
362 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions
