Sony BRAVIA KDL-40S2000 40 in. LCD HDTV "standby blinking twice" Questions

...standby light blinks twice when set is turned on B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the ...

...twice, the tv will be on for a about a half hour and then boom standby mode..please help When I power my Sony lcd 42 inch the red light blinks then I push the power button the green standbye light ...

...standby mode. Blinking twice.. Would replacing the power supply possibly fix this problem? Please help. Normally yes. Blinking twice is power protection trip. Look first for open resistor, broken ...

...standby mode. Blinks twice. Would replacing the power supply possibly fix this problem ? Problem is related with Power board. Check and confirm the secondary supply of 5V & 12 V are normal. ...

...standby 2 blink code appears as soon as its turned on at the mains. I've replaced the power supply board (147420812) as thought this was the problem but sadly the blinking 2 times then pausing and ...

Blinking Codes: TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits. Try checking

...twice, if not recheck the 4 digit code used and go back to 1 7) Press the standby button on the Sky Remote (The TV should go to standby) 8) Press select to store this setting If the TV does not go ...

...twice, if not recheck the 4 digit code used and go back to 1 Press the standby button on the Sky Remote (The TV should go to standby) Press the Select button to store If the TV does not go into ...

...twice, if not recheck the 4 digit code used and go back to 1 7) Press the standby button on the Sky Remote (The TV should go to standby) 8) Press select to store this setting If the TV does not go ...

...blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about ...