How do i removing the stand Just unscrew the stand at the back
Question about Sony BRAVIA Televison & Video
...damaged.on the back you'll see where the base joins the bottom of the display, this needs to be unscrewed and a wall bracket screwed in
...knows how to do this, please reply!!! I know its been awhile but you have to lift on base while unscrewing... Couple of seriously long bolts that eventually stop when unscrewing.. lift and put ...
...unscrew it, remove it and lamp is there, unscrew lamp with hex key (supplied in new lamp box) and take out old lamp, put new lamp and put things back in reverse order. Click Sony Support if you want ...
...remove the stand from my tv 1. Verify that there are 4 screws fastened (2 screws on each side which can be unscrewed using a hexkey) 2. place the TV on a flat surface with the screen facing down... ...
...unscrew rear cover cables from power board to other components unscrew and remove power board put in new board and screw down re connect cables screw back on the rear panel plug in turn on
...Remove the speaker grill on the front of the tv by pulling it outward evenly, so not to break it. While looking at the front of the tv, there will be a compartment on the right side. You unscrew 1 ...
...from wireless box can you show me how to remove the battery from the wireless box I've only ever had to remove the battery from the monitor to reboot the system. Just unscrew the panel on the
...remove the base, which folds into 2 pieces, but does not seem to want to let go of the TV. The owners manual has no instructions for removing the base, and my removing a few obvious screws had no ...
remove the back. have you removed middle and bottom center screws? Make sure you unscrew the flat nut (looks like a washer) on the coaxial cable/antenna input. If you've already done that, there might
86 questions posted
Usually answered in minutes!
541 Questions
531 Questions
381 Questions
277 Questions
252 Questions