Black & Decker Spacemaker (ODC440) 12-Cup Coffee Maker "pot work" Questions

I have a 1993 Curtis Alpha III Commercial Coffee pot, everything works nice, but makes does not stop making coffee after one pot? It stops at about 2 pots. How can I adjust this? Bought this at a ...

I cannot brew one pot after another. It seems that the heating element will not cool off so it will not trigger the fresh pot to brew. Do you turn off the pot before you refill the reservoir to brew ...

Is it possible to replace a wire ? to my my thermo pot model NC -30 HN. The thermo pot is working the wire is loose I need a new wire All I need is a new wire for this productI need. model NC -30 HN. ...

...If it will not perk or even get warm, the main heating element (usually in the middle of the pot) is probably bad. Get an ohm meter and read the resistance directly at the pot terminals ...

No Coffee I have ran the pot thru a cleaning cycle of DipIT. I fill the pot and the water heats with very little reaching the basket of grounds. I check the stem for obstuction; none; and the ring on ...

...pot but may work for 3/4ths a pot. The 1/2 way mark may be affected by the brewers "level" while placed on a table or sagging in the middle of a weak table. * Usually if you want a smaller brew then ...

I fill the pot with water and push the power button. The water doesnt filter into the pot however the heating plate works. The power button was blinking a couple days before the pot stopped working ...

...work is that there is some sort of gasket (rubber disk) that has a lever/spring mechanism that plugs the way out of the filter basket when there isn't a coffee pot under the filter basket. They are ...