Dell Latitude D410 Notebook "tight screen hinge" Questions

...tight. Then just reinstall the hinge. I just did this and I know it works. You are right, the fix is to replace the hinges. Check this WEB site for Replacing Display hinges ...

...screen is tight, it's on to the screen Inverter.Primer:An LCD screen does not produce light by itself. (With some models though, it should be stated as not enough light)A Backlight is the ...

...tight, (Motherboard/screen Inverter/LCD screen), and/or damage to the Video Cable. HOWEVER due to the price of the screen Inverter I just found, through a quick search; and the ease of accessing to ...

...Hinge, and into the Display Assembly. [From there the long Yellowish connector on the Right, plugs into the back of the LCD screen. There is a small cable at bottom, that plugs into one side of the ...

...www.lapzone.com/servlet/StoreFront www.laptoppartsexpert.com/ www.sparepartswarehouse.com/ u just need to tight hanges open screen front cover and tight screw from right and left.. thats ir .. ...

...tight and the screen is loose then the hinges need to be replaces because there are no adjustments available to tighten them. Replacement hinges may be available from one of these WEB sites. LAPTOP ...

...tight putting a lot of stress on the hinge mount. I used Gorilla glue for the repair. The following videos are helpful for removing the screen: http://www.youtube.com/watch?v=o7vSFvHphxM ...

...the bezel between the hinges. After removing the bezel screws, the bezel will still be secured tightly, there are retaining clips that fixe it to the lid and may also be held in place with

...hinge itself is broken. I have a relative with exactly the same problem, her laptop screen became floppy and didnt stay in the upright position. The hinges for the screen are complicated in that they ...

...screen feels a little loose, so, I suspect a poor connection. Is this a common problem? Not in any service bulletins I have seen, nor on the internet. What is common is that the laptop may have been ...