Question about Dell Inspiron Computers & Internet
...AC power adapter plugged in? At any rate the constant restart is indicative of a failing power supply (not meaning the battery but the power converter that is inside notebook). After the BIOS the PC ...
Question about Dell Inspiron Computers & Internet
AC adapter probably is OK. If pressing the ON/OFF button causes a message like "press (or ) to enter setup mode", then press that named key. Once inside BIOS SETUP, check that the disk-drive has been
Question about Dell Inspiron Computers & Internet
F8 at startup before the logo appeared. I got an advanced boot menu, but there was no option for repair computer. Or to restore. There isn't anything I can use on F2 or F12 either. There is a drive on
Question about Dell Inspiron Computers & Internet
...AC adapter. In most situations it's a bad battery. Disconnect accessories plugged into the computer, such as the printer or mouse, and try restarting it. Start the computer in "Safe Mode" or use the ...
Question about Dell Inspiron Computers & Internet
...AC power adapter, then restart notebook Symptom 2: LEDs blink or computer beeps but does not start Blinking LEDs or beep tones indicate a hardware failure during the pre-start up testing Count number ...
...AC adapter.Symptom 2: LEDs blink or computer beeps but does not start Blinking LEDs or beep tones indicate a hardware failure during the pre-start up testing.Count number of blinking LEDs or beeping ...
AC adaptor, check the power light and battery light are illuminated. Keep disconnect any periferals, (USB devices) and ensure the DVD drawer is empty. Press the power button. The POST should now start
Question about Dell Inspiron Computers & Internet
...F8 with various settings, but no luck. My guru friends have tried reseating ram, emerg. dics, checked fans, ac adapter, etc., all to no solution. Suggestions? I would suggest checking your hard drive ...
AC adaptor, check the power light and battery light are illuminated. Keep disconnect any periferals, (USB devices) and ensure the DVD drawer is empty. Press the power button. The POST should now start
ac are in the right voltage area, moved the ram to second slot and get the same reaction , will load bios and contiue to load up to the windows scrollbar at bottom then flash a blue screen and restart
149 questions posted
Usually answered in minutes!
1,822 Questions
1,740 Questions
1,432 Questions
1,351 Questions
971 Questions