Question about DISH Network Televison & Video
remote, then press the pound button (#) that is under number 9, once you press the pound button, the sat button will flash 3 times then press the record button. you will see that the remote address is
...remote press and hold the TV button and at the same time press and hold the power button, the red light will go off and after some time come on, then let go of the buttons. Next, keep pressing the ...
Question about DISH Network Televison & Video
...remote press the "tv" button, then underneath that is an "input" button. Press this slowly until you find picture. If this doesn't work, look on the side of the tv for a button labeled "input" or ...
Question about DISH Network Televison & Video
...remote. r_pettit, I can definitely assist you with this. What button do you press when you turn off the TV? Have you tried pressing 'SAT' then the big red 'Power' button on the remote? Tommy Faust ...
press + button. You have solid red LED and blinking red LED. Enter code 9 9 0 0, by remote blinking LED will show green. Wait a few minutes and the instalation page will appear on screen. Go to update
press it on the Tv NOT THE TV REMOTE. You will see a little bar fill up and the power lock will turn off. Ta Da! Thank you for your help the menu and vol plus on tv at the same time was the answer but
Question about Humax Televison & Video
...cable 2. turn the power on 3. keep pressing the power + channel buttons on the device (not the remote) keep pressing for 10 to 15 seconds 4. then you will see channel No. ## instead of "boot" 5. ...
Question about Directv Televison & Video
remote). Press select. It will run a diagnostic test. When it's finished, it will show you the results. If the tests fail, you will get a diagnostic code. Call DirecTV with this code and they will
...Press the pound (#) button. To check that the code works try several differentfunctions on the remote to make sure it will properly operate the TV. Keep inmind that some codes may not be compatible ...
Question about Universal Remote Control Televison & Video
my pansat 2700a channels keep showing up on radio what do i do Press TV/Rad button to restore TV channels.
35 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions