Garmin StreetPilot 2730 GPS Receiver "touch screen calibration" Questions

touch screen calibration To calibrate the StreetPilot c-Series touchscreen, follow these steps: Begin with the device turned off and unplugged from a power source Power the device on and continue to ...

...touch screen is not responding properly, press and hold the Power button until the Calibration screen appears. Follow the on-screen instructions. There is a calibration screen in the setup system on ...

...touch locations near the top of the screen. In many cases this results in not being able to execute buttons or features if they are located near the top of the screen, instead the unit will respond ...

touch screen does not work. I purchased this unit three years ago and really love the sure direction and not getting lost. Is there something that I can do to fix the problem. Tommy Thompson (1) ...

touch screen does not respond. Try to calibrate the touch screen. Push and hold the power button on until you see a white dot on the screen. This is the calibration mode. Touch the dot and another dot

touch-screen mishaps I just got the receiver so I don't know if it would have ever been right, but the lower area of the screen will not recognize touch commands. For example, when you hit the lowest ...

...touch screen. With the unit off press and hold the power button until the calibration screen appears (approx 35 seconds). The follow the instruction on touching the dot on the screen. Once this is ...

...touch screen on my GPS unit is not working right. The left side of the screen is fine, but the closer to the right side you touch it starts picking up the wrong button. IE: if your looking at the ...

...touch screen, today i tryed fixing it by telling the garmin to disable the remote, well it didnt work so now how do i get my remote to work agai since i cant use the touvh screen!! (1) Disconnect any ...

touch screen does not respond (but there is still a clicking sound). any advice? This was just suggested for the exact same problem with my StreetPilot 2620 and worked like a charm: (1) Disconnect any