...Every thing was put back exactly as taken apart. Could it be the new battery? No, one of the LCD flex cables is not fully inserted into its connector. unlatch the lock down flaps and reinsert ...
...flap. Trying to insert it into the connector without lifting the flat probably caused the cable to flex and crack. You're best bet is to buy an AS-IS unit on eBay that is dead or has a defective LCD ...
...flap). 3. The magetic switch isn't operating correctly and the main board thinks the antenna is down. 4. The front-end receiver has failed. If your good at taking things apart (and the Nuvi is a ...
...LCD locking flap. With the power off, you need to lift the locking flap up re-insert the LCD flex cable and then lock the flap down. The latch is fragile, so be careful not to snap it. ...
...by an intermittent LCD display or the lock down flap for the LCD is not putting enough pressure on the LCD flex cable to mate eith the board connector. http://www.sharc.net/gps_LCD_repair.htm - ...
649 questions posted
Usually answered in minutes!
1,343 Questions
1,187 Questions
1,096 Questions
889 Questions
690 Questions
