Garmin nuvi 350 GPS Receiver "40 turn" Questions

...Turn on no response only logo garmin this wad due to a bug in a SW release of Nuvi 40 . I think the SW was not erasing old points in internal log and after some thousands of Km it crashes. The only ...

...40 no sound sound has stopped working The usual problem is the voice volume is turned down. This can happen when you are adjusting the volume down just as turn by turn instructions are starting; thus ...

...40 I got the garmin brand new when I turn it on all it does is give me a white screen. If it is brand new, I would return to the seller and ask for a replacement.  Sometimes chasing down a ...

Turn) Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4

40 will not charge When I took the product out of the box it turned on and began it's normal set up process. The battery was very low which I'm sure is standard. I tried plugging it in

...40 with the latest software and it will not reboot into GPS mode with the usb cable connected.  It used to work.  I have figured out how to get it to charge with a standard USB cable:1) ...

My navigon 40 easy does not turn on It charges but does not turn on check the power cable first

...Japan Try and turn on the unit at the J300-40 pcb by using a test light one end to gnd and going to the ap35 interconnect and touch the test light to each pin or until you hear the unit start

GPS 40 will not finish aquiring signal GPS 40 will not finish aquiring signal, everthing else seems to work but will not come out of acquiring mode.Iis the unit bad or can it be reprogramed. make sure

...it there through the next couple of steps. 3) Turn the Nuvi on with the slider and immediately put it into the lock position. 4) Keep holding that finger on the screen for about 35-40 seconds or