Question about Rockford Fosgate Car Audio & Video
Power Handling: 300 watt The main reason I am confused is because the impedances are not matching, and I have no idea if that is inadequate, or if the lower impedance on the amp will suffice. Also how
Question about Ohm Car Audio & Video
...get 1.6 ohms but the subs would not be balanced. If you run both subs on only one coil and the subs in parallel, you would get 2 ohms (but only if the individual coils are rated for the full
...cannot run 2 dvc 4 ohms at 2 ohms its either 1 ohm or 4 ohm. and yes you should bridge them better performance and power. i have looked it up for you and this is your 2 options at running your
...power without blowing or burning any of it Run a Jumper from coil 1 + to coil 2 + and a jumper from coil 1 - to coil 2 - and then run + from coil 1 to amp and - from coil 2 to amp. This will put your ...
produce a 2 ohm load at the amp. NOTE- a 2 ohm amp running a speaker wired for 1 ohm will not have enough resistance to limit the power coming from the amp and runs a high chance of burning the amp up
power and put out 3 times as much sound. but i can check it out if you have the info. with your 1000 zx1 kicker amp you would not be able to wire it at two ohms running at 1000 watts with a dual 2 ohm
...power rating, it would run cooler and might last longer than a 2-channel amp with comparable power. When looking at mono amps, you'll find their highest power output will be at 2 ohms or 1 ohm; make ...
...run a 2ohm an the kenwood amp will push 900 watts at 2ohms.they say it can push up to 1800 watts,that would be at 1ohm.that kenwood runs 500 at 4ohms an 900 at 2ohm.if you need help wiring the sub or ...
...power out of the amp. but itll run a littl hot if you dont have adaquate power running to the amp. now i wanna think your alpine amp maybe only 4 ohm stable. i would run both subs like i had said pos ...
...so what kind of amp do i buy to run a single swr 1021d in my 330ci if it is a dual voiccoil its 2 ohms per coil if its a single voice coil its 4 ohms need to know power rating people cant read ...
44 questions posted
Usually answered in minutes!
217 Questions
156 Questions
152 Questions
73 Questions
53 Questions