...got bent when the door was opened too far, or most likely one of my kids pushed it open wide. I took a pair of pliers and bent the tab back towards its normal position. It shuts very solidly
...door are hinges check for loose if loose tighten -if bushing lookes like a little round washer type is broken or missing replace --needs realignment loosen top hinge and close door and adjust till ...
...bent. There top hinge sometimes can have an ajustment that moves the top of the door left and right wich will raise the door a littel. to see if this has an ajustment you will need to remove the top ...
...Pulling up on the handle seals the door tighter and the light goes out. How do I fix the problem? Is sounds like you will have a broken or worn out or bent hinge. It may be a combination of the
Question about Amana Refrigerators
...door hinge. you may have a bent hinge or a worn out shim that is allowing the door to sit to low and not close the light switch when you close the door. inspect the lower hinge area of the dooor to ...
hinges that allows the door to slide up and down? A little bit is normal, but too much indicates a sagging or bent (not common) hinge. You may have to lift and support the door to take up
Question about KitchenAid Refrigerators
...still instances where if the door shuts too fast, it will miss the latch. hinge damaged /bent or worn and the hinge has adjustments on it --if low make a bushing from plastic-washers not ...
...do I stop the fridge door from opening to far and hitting the oven The door stop is probably broken or bent look at the bottom hinge of the door that's a problem and compare with the other door ...
...correct position? Usually that is an indication that your unit is not level. Unless one of you hinges got bent (someone riding the door).which would require the replacement of that hinge
446 questions posted
Usually answered in minutes!
1,098 Questions
312 Questions
169 Questions
102 Questions
105 Questions