Acer TravelMate 2300 Notebook "jumper j3 clear cmos" Questions

...J3 or Cmos reset. You will have to hold a thin piece of jumper wire on these points to "short" the connection while power is applied to the board, this will reset the Cmos and clear the

...about 30 secs) worked perfectly for me!The J3 Clr CMos Jumper can be found underneath the RAM module(s). So open the larg(est) back plate, remover the RAM gently (becareful for static) and short

...jumper labeled j3. It is flush with the board, just lay a screwdriver on it, hit the power button and you have cleared it. crazy jumper. put the memory back, reboot and hit f2, you should now be in ...

...Jumper J3, Where is it? Remove all ram memory modules. The J3 Clear CMOS Jumper is in the middle of the ram memory compartment. This is a link to a free Service Manual for the Aspire 5630 series of ...

...J3 jumper. There is a J3 with a square line going around it. This jumper is used to clear any settings made, and will go straight back to all factory default settings. In otherwords if someone set a ...

...jumper hidding under the ram. With the laptop OFF remove the ram and check for J3 its is usually a bit more distinctive than the normal green pcb You need to short that jumper out for a second or so ...

...J3 which is printed on the motherboard. The jumper is small and what needs to happen is you have to "short" the jumper with two small pins shile powering the laptop up and letting it boot. Once the ...

...about 30 secs) worked perfectly for me!The J3 Clr CMos Jumper can be found underneath the RAM module(s). So open the larg(est) back plate, remover the RAM gently (becareful for static) and short