Kenwood KFC-W3514DVC Car Subwoofer "500 amp" Questions

...500 rms &a1000 watt avionixx 4 channel amp what would be the right wiring scheme? i have 2 15" dvc 4 ohm kickers 1000 watt / 500 rms &a1000 watt avionixx 4 channel amp what would be the ...

500 1 channel amp Ok, so you have a single 2 ohm speaker and a 4 ohm speaker with dual voice coils? The JBL Is a 2 Ohm load I believe.


I ran through the maths...

Series parallel with

...500 watts and they are in parallel, series well NO.. your amp puts out wayyyy too much for those speakers.. 1200w versus 500 watts by 2... srill NOT enough "Head room" for it to be safe... about half ...

...If you're using a very high output amp, like over 500 watts RMS, you can use 12 ga. wire. If you want to be on target for your size, I need to know what amp you have and how many speakers you

...500 watt vpower amp and i wanna hook two 10 inch subs up to it the only problem is these subs r not ones to screw with they r 1 ohm and legit have caution written on the side of the subs....so wud it ...

amp, but what kind dual channel or 4 channel? assuming about 1000 watt. Any help or advice is much appreciated... two channel will do with the same power power rating of your speakers ex. your speaker

amp and bass speaker in my 2009 v6 Mustang. It has a basic single CD/MP3 radio with aux in. Not a Shaker 500 or 1000 well you can installl anything you want into your vehicle you just need to know how

troubleshootin!!! My amp has perfect 12volt and secure ground, but when remote is powered up, amp doesn't kick on (remote has full 12 volt) If you haven't already, check the fuse(s) on the amp itself.

...amp will push 900 watts at 2ohms.they say it can push up to 1800 watts,that would be at 1ohm.that kenwood runs 500 at 4ohms an 900 at 2ohm.if you need help wiring the sub or anything else let me know ...

...500 go to each speaker If you bridge the amp and get 1000 watts RMS and that is split going to two speakers then you will get 500 watts RMS at each speaker. If you have your amplifier on maximum gain ...