Nuova Simonelli Premier Maxi Espresso Machine "replacement coffee level gauge" Questions

...level indicator How do you remove the glass on the elektra micro casa? Not hard to do. Unplug and drain the water. unscrew the frothing wand and tip the machine gently over a sink to drain the water ...

gauge spikes and release valve blows. What do you think is causing that- Hi That sounds like a couple of problems. For one the pressurestat is sticking and causing the pressure relief valve to release

...level sensor or the control circuit board is fried. Empty the water out and fill it with vinegar as full as you can without overflowing. Let it soak overnight and turn the machine on (without coffee ...

...coffee shop, and the machine they have is an Astoria Expresso CMA Model SAE/2N.. They dont have a manual for it, and would like to get one... Also the boiler has quit working on it.. I would like to ...

...replacement every week.) Level? okay recheck machine. Otherwise continue on: 1. water fill valve stuck and or leaking. Replace. 2. Manual fill valve stuck or leaking. Replace (OR disconnect and seal. ...

...replacement that has the same defect. I wonder if there is a class-action case here? I am currently on my second DCC-2000 coffee maker. The first one died after almost a year, and the one that I have ...

...level. The steam function requires sufficient water to generate steam. Purge Air from Boiler: If you're getting low air with no pressure from the steam wand, it's possible that there's air trapped in ...

coffee button repeatedly, the button in the bottom center on the control panel. Finally, give the button a few clicks and try the machine again. --Make sure there is water in the boiler, unlug machine

recently bought a used premier maxi that was working when we picked it up. after hooking it up to our water supply and turning on the water to the machine the boiler overflows and is released through ...