...clipper It is either your blade drive, the plastic piece that moves the blade, or the little metal pieces that stick out the underside of the blade, or a screw is loose. The blade drive will have to ...
Question about Wahl Pets - Others
...the blade latch assy are tight where it screws onto the front housing, blade off to check them. 3rd thing to check is for excessive wear in the lever that drives the blades, if it is worn replace
clipper without pressing the blade release button then either the hook on the Latch is broken (which will mean all blades have the same problem) or the blade socket on the blade may need adjustment or
...not locking I have replaced the blade drive. I just bought my clippers and they will not lock my blades into place. When I put them on I can still take them off by simply pushing backwards on the ...
...the blade latch assy are tight where it screws onto the front housing, blade off to check them. 3rd thing to check is for excessive wear in the lever that drives the blades, if it is worn replace
...to "pull" the hair out instead of cutting it. All movable parts have been replaced and blades sharpened and oiled but it's still doing it. Any suggestions? Lever arm worn, blade ...
...clipper blade I can slip the blades on, but it will not lock the blades in place. I can simply push the blade backwards and it will come off. I have replaced the Blade Drive and it did not help. What ...
clipper is dragging leaving lines on the coat of clipper is dragging leaving lines on the coat of the dog First replace or sharpen the blade.
Question about Andis Pets - Others
...clipper on and it ran poorly, then emitted a puff of smoke and stopped running. You need to replace the motor and the PCB. The motor is drawing too much current, that's what has wrecked the PCB. If ...
...lines like if my blade was dirty. I make sure my blades are clean and when I switched clippers.. I had no issue with lines. Sounds like it's time to replace the clippers with something much
4 questions posted
Usually answered in minutes!
2 Questions
2 Questions