GE GSH25JSTSS Stainless Steel Side by Side Refrigerator "compressor start relay" Questions

...compressor start right away with a new start relay if that was the problem. If the compressor is shorted to ground you will need to have the compressor replaced. Given the history on whirlpool ...

...start relay clicking and compressor not coming on. I replaced thr start relay and the new one still clicks and the compressor still doesn't come on Whirlpool fridge gs5shaxnq00 start relay ...

...compressor will not start and you will hear a clicking noise in 2-5 minute intervals. The clicking noise is the overload cutting the compressor off when it overheats from trying to start with a bad ...

...start the compressor nothing will. If your no good at wiring and cannot determine the start common run winding on the compressor than let a professional do it. Another possibility is if the ...

...start relay on the compressor located the start relay is located on the compressor, and is covered with a plastic covering with a with the wires coming out of it. the relay is sitting in pins coming ...

compressor does not start all I get is a clicking sound when it tries to start model#970-65832c purchase July 2004 The clicking could be the start relay.If the start relay is bad, the compressor will ...

to "hear it out". The start relay gives a boost to the compressor by adding in another winding inside to 'kick' the compressor. If all you hear is the buzz, you might just wait a bit to see what fails

...compressor will not start and you will hear a clicking noise in 2-5 minute intervals. The clicking noise is the overload cutting the compressor off when it overheats from trying to start with a bad ...

...compressor to start.if this relay is weak or faulty, then it will just click, but not let the compressor to start.This relay needs to be checked and replaced.--------- Click the link below for more ...

...compressor via the start/over load relay (normally attaches directly onto the compressor), or if the start/over load itself is bad the compressor will not run. Best way to tell is via gauges but I ...