Kenwood KDC-X590 CD Player "fix distortion" Questions

how do i fix my bass and treble on my deck If you are having distorted or muffled sound from your deck then this could be caused by either 1)poor settings 2) bad output amplifier or 3) blown speakers,

I'm quite sure my cars aftermarket deck is overheating and the sound gets distorted. How can i fix this problem? if you have a multimeter you should check your speakers to see how much resistance they

losing my high i have mp435u ihave a 1200 w crunch running my subs and i have another 1000 w crunch running 2 300 w kenwood 6 by9 and 2 tweets 250 w from low 2 alittle less than half way it sounds ...

Sony CDX FM reception Hi - Sony CDX -R550 connected to my Wagon R FM suddenly got distorted (scratchy/muted). Is the problem with antenna, set or wiring? This was working fine for the past 3 years!! ...

...work fine Very low sound out of front left speaker while other speakers are fine. Can this be fixed and if so how and what is wrong? Have you tried another speaker? If your left front speaker

...distortion or anything. Was wondering what this could be and if there is any way to fix this problem? Thanks for the help Start by connecting it to one of the other outputs off the deck, say the left ...

...sound distorted. I checked all the wiring at the harness and seems to be correct. What can i do to fix this? I had the same problem and here's what fixed it. By default, I did not connect the ...

fix it? You must get the replacement part, take the radio apart, remove the solder from the amp ic, put new IC in and resolder connections. Put radio back together without forgetting anything you took

...but any ways put it where that max hole thing is where there is a screw there and that should fix that problem cause i had that happen before .. but make sure your antentia is pluged iin to ok

...volume past 22. Also the sound becomes distorted at higher volumes. What's wrong and how do I fix it? CHECK THE WIRING TO YOUR SPEAKERS FOR + AND - POLARITY. COULD ALSO BE A BROKEN SOLDER JOINT ...