Kenmore 30 in.32099 / 32094 / 32092 Gas Cooktop "replace igniter switch harness" Questions

Ad

Question about GE Cooktops

1 Answer

...igniter won't quit Possible stuck burner switch or failed spark module. Unplug unit. Remove wires from burner switches at module and plug back in. If it starts sparking, replace module. If it stops, ...

Ad

...burners; hxw screws. Pull burners out and disconnect igniter burners. Lift the top of the oven off. The Switch Harness is on the right, under where the knobs are located. Replace the Switch

Ad

...igniter,use matches or lighter every time to use,if not turn the burner remove the knob & try to use hammer slowly at the top of the gas valve mostly the problem is stockcup,use oil b4 u try to ...

...break overhead and minimal water leaked on the cooktop. The igniters keep sparking and will not shut off. I have tried drying with forced air and no solution. replace the igniter switch

Question about KitchenAid Cooktops

1 Answer

...replace the bad igniter/switch harness. Take off all the grates and burner caps Unplug the unit and turn off the gas line Un-screw the 2x screws on each burner Remove burners and knobs Lift up on the ...

...when the y are in the "off" position. Replace the one which has continuity. Some GE cooktops have an assembly of all four switches and harness. Check by model number with any parts

Question about Maytag Cooktops

1 Answer

...with a match and if so the gas is ok but the ignition moduel has failed. replace the moduel / other causes may be the switch harness . ck the switches and the wiring before replacing the oduel .. ...

...the large burner turned on will cause the igniters to stop sparking. sounds like you have a bad switch. maybe on the large burner.. some of those switches can be replaced without the whole

Question about GE Cooktops

2 Answers

...switch harness on a 933, it is really simple. Carefully pry up the 4 white porcelain igniters (use a cloth around plyers to protect the white part).  Pull off the wires. Use a torx ...

...replace that switch harness asm. ya need to take off the main top which can be done by removing the burner grates and caps from the burners,then is the outer center of each burner will be 2 screws ...

Not finding what you are looking for?
Kenmore 30 in.32099 / 32094 / 32092 Gas Cooktop Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Cooktops Experts

Kolbrun...

Level 3 Expert

1228 Answers

k24674

Level 3 Expert

8093 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenmore Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...