Question about Cobra Radio Communications
...knob to get the dss right, there is no noise for the squelch at all. I think its vr6 in that radio but you have to turn it till you hear noise. did you use a signal generator to set the
...squelch. Set your squelch control knob on the front of the radio to about 10 o'clock and slowly adjust VR3 until the signal from the speaker is mute. When you turn the squelch back to the 0 position, ...
...set up to a antenna source? if so then turn the squelch nob counter clockwise all the way, then turn the device on. next start at channel one and slowly turn the squelch clockwise until the pin moves ...
Help setting up bc145xl scanning radio you have to adjust the squelch. When it scans it will stop when ever the squelch breaks. Start with the squelch turned up a little less then half way, then scan.
Question about Radio Communications
...squelch setting is set too low. This will stop scanning, and as the radio thinks there is a valid signal, it will not transmit. I have no idea what radio you are using, but this is a common situation ...
...squelch gets broken so turn it up and scan or it will start to auto scan if you set it too auto when a signal breaks then it stops .. and listens you can set it to manual so when a signal is detected ...
set my knobs so my radio works Turn the volume up about 1/3, the squelch off or fully counterclockwise. You should now hear static or talking,if not something is wrong with the radio. As a last resort
Can I adjust squelch setting on GMEtx650 if so how? TURN IT ON.... MAKE SURE THE VOLUME IS LOUD ENOUGH TO HEAR.... TURN THE SQUELCH UP TO MAKE NOISE...THEN TO THE LEFT SLOWLY TO WHERE THE NOISE STOPS.
set the squelch. Most radios have the squelch open when set fully counter-clockwise. As you move the squelch to this position, sound should be heard from the speaker if a signal is present.
30 questions posted
Usually answered in minutes!
247 Questions
183 Questions
153 Questions
141 Questions
155 Questions