F10=ROM Based Setup Hello, my screen shows mensage F10=ROM Based Setup, and it does not allow me to do nothing, already retires the battery of the card mother, I form, and when the assets again, ...
Question about HP Computers & Internet
...F10= rom based setup I have problem with my compaq nc8000. I have this lessage on start up: F10= rom based setup its common.it always come and still if it doesnt allow you to access ur pc then click ...
F10=ROM Based setup i pressed F10 but I can't go into bios. please help me!! My hp Compaq nx6120 can't starts. When I turn on screen the follow messages F10=ROM Based setup i pressed F10 but I can
Question about HP Computers & Internet
...F10=ROM Based Setup. When I press F10 nothing happens. stating problem Sounds like the hard disk is not able to boot the laptop. ROM based setup means you need to reset or reconfigure the BIOS. ...
will not boot, sticks at HP invent screen with F10 = ROM Based setup on bottom left of screen press f10
...f10=rom based setup That sounds like the laptop has lost data in the BIOS. Run the BIOS and check the hard drive is listed, save the information with F10 and boot. If it isn't listed change the hard ...
...F10 rom based setup or F12 network boot only. Without having seen it, it sounds like a hard drive problem. Could be dead, could be the boot info has been destroyed (virus?). ROM setup should be able ...
...press F10 while the ROM-Based setup massage is displayed on the screen. Change the Enable or Disable the system booting. Enable BOOT ON HARD DRIVE. Save the setup. (any order issue contact me) ...
HP Compaq nx7300 F10 ROM Based Setup did you have a question?
...be very careful. Now restart the computer press f10 when the F10=ROM-based setup is displayed on the screen. Select File=Restore default and then press enter/ok (if any hassles still come back). ...
3 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions
