Cobra 200 GTL DX 4-Channels Base CB Radio "cb good low ssb power" Questions

Good volume and transmit on am but ssb has very weak receive and low output adjust the hi and low power on side band ,also make sure you have good SWR match.

...low on the usb,s but is fine on FM as its the mrk 2 thank any info would be good The link alignment info http://www.cbtricks.com/radios/cobra/148gtl/graphics/cobra_148_gtl_sm_pg48_pg63.pdf The best ...

low power on am/ssb no swing all finals ok all voltages seem to be right but still will not show more than 1 watt try adjusting the L36,L38 to the highest reading on the external meter and then adjust

low-2 to 20 & high-10 to 30. all i ask him to do was align the AM & SSB. Can someone help me get back the swing??? [email protected] You will need a good technician. I know of a few but I do

...good for a few seconds then within 2 seconds the power drops off rapidly , needle in meter then does slowly drop away under ssb modulation till it does not react at all. On low power the transmitter ...

...good luck Rick I purchased "NEW" 2995dx from Pacetronics. The box was clearly repacked and taped back up. I immediately asked Ranger and Pacetronics for "NEW" exchange unit. NO! so I sent to Ranger ...

...of the three because on ssb they tx on about 12 watts rms so you have a better chance of making contact, but don't count on it as hf cb is no longer in common use. GOOD LUCK ...

...Low selector switch to choose band A, B, C and in the other position D, E, F.  A listing of frequencies that can be tuned in this manner can be found by clicking the link ...

low and 10 on high. I did touch a few things that I wasn't supposed to. Can anyone of you electronically inclined gentlemen help me out?? I would really appreciate a LOT!!!!!!! Readjust your load coil

...volted the final and put that stupid modulation kit in there. unbeliveable. i hate the cb hacks that give good techs like me a bad name. shame on the hackers. that is why it does not work on