Cobra 150 GTL DX Base CB Radio "radio dim" Questions

Ad

Question about Galaxy Radios Radio Communications

3 Answers

...radio lights dim slightly when I kay the mic. Is that normal? Other than that it works fine. its normal its only cause your useung more power from the deck The dimming is caused by inadequate current ...

Ad

Question about Connex Radio Communications

1 Answer

...radio, you're putting enough load on your electrical system to pull the voltage down which causes you lights to dim, rpms to drop, etc. When you key off, everything goes back to "normal" which means ...

Ad

Question about Connex Radio Communications

1 Answer

how do you dim display lights on a connex cx 3400 hp O the front you should have a dim switch its on of 4 up & down switches ? if not check on the back ? was it bought as a new cb or was it 2nd ...

Question about Galaxy Radios Radio Communications

1 Answer

Hum In The power supply do the lights dim when transmitting? if so probably needs replacing if not there's nothing you can really do as far as i know but replace it.

Question about Radio Communications

1 Answer

why does the meter lights dim when you transmit Need more info< Is radio running on power supply in home or in vehicle?

Question about Galaxy Radios Radio Communications

1 Answer

channel led very dim and only 11 volts to meter light Hi, my name is John. Check your power supply, should be about 13 volts. hope this was helpful...

Question about Radio Communications

1 Answer

...dim. I checked the two output transistors and they were fine. The power supply outputs the correct voltage (@ 14v ) until I turn it on then it drops to @ 6v. The clue is that it happend when I keyed ...

Question about Connex Radio Communications

1 Answer

dimmer Is there a way to dim the dispaly? Yes. It requires replacing some resistors on the main circuit board. If you need it done, give me a shout.

why does the meter lights dim when you talk to transmit power draw.What kind of radio?

stryker cb radio lights still 2 bright evan on low. any way 2 dim them a little more yes you will have to solder a resistor in line to the led circuit

Not finding what you are looking for?
Cobra 150 GTL DX Base CB Radio Logo

75 questions posted

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

eradiostore
eradiostore

Level 3 Expert

1672 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...