Casio FX-115ES Scientific Calculator "sci mode" Questions

the MODE key until you see the screen giving you the three options "Fix", "Sci", and "Norm". Select Norm 1 or Norm 2. If you select a Sci mode, you'll get "SCI" on the screen in place of the "FIX"

MODE (SCI or NORM or ENGineering). You cannot remove DEG unless you change angle unit to RADians or GRAds. To set angle Unit You start by pressing MODE twice to get a screen that displays DEG, RAD and

i just wanted to know if there is an engineering key or function like sci on the fx115 es casio calculator SHIFT MODE 7 for SCI and SHIFT MODE 8 for ENG. Each of them needs to be followed by a digit.

...can it? I need to make it work for my exams next week so I'd kindly ask for a prompt reply:) press MODE then select CALC then COMP to remove REG. press MODE again select DISP then NORM1 to remove

...MODE][2:LineIO] To get out of Sci display format, press [SHIFT][MODE][6:Fix] followed by a number between 0 and 9, that will set the number of decimal digits. Hope it helps. Thank you for rating this ...

...option 2. You can change this by pressing the MODE key 3 times again. which gives you the three choices: 1: FIX 2: SCI (The mode you're in) and 3: NORM (for normal mode) Choose 3 and you are all

...mode key, try pressing it repeatedly and see what is displayed. If you see FIX, SCI, ENG, Float or NORM, press the key corresponding to float or Norm (if there is no float).If your calculator has a ...

SCI mode like FX-991es? (ex. 1x10^3 to 0.001x10^6 or 1000000x10^-3) Press the MODE button, select "SCI" on the second line, and select the number of digits on the third line. See page 5 of this manual

...MODE] . On the top line that says Normal Sci Eng use left arrow to move highlight from SCI to NORMAL an press [ENTER] to validate the setting. After that, you must set the number of decimal digits: ...

...9 is the function for NORM, which means normal use. DEG is always on, but if you want to clear SCI or FIX, MODE 9 will clear these. go to 2nd and press scientific two times,..well i hope that ...